Samsung 460UXN Manuale Utente

SyncMaster 400UXn,460UXnLCD MonitorUser Manual

watching. Then push button again to circle through available pre-configured modes. (Entertain → Internet → Text → Custom )13. AUTO Adjusts the screen

- This fuction does not work for this LCD Display.26. PIPEvery time you press the button, a PIP screen appears.27. SOURCEChanges the source of the

LCD Display HeadNETWORK MODEL SIZEInstallation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchas

DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.Wall Bracket Installation• Contact

There are two hinges(left and right). Use the correct one.A - Captive ScrewB - Wall BracketC - Hinge (Left)D - Hinge (Right)2. Before drilling into th

To mount the product on the wall bracketThe shape of the product may vary depending on the model. (The assemblies of the plastic hanger andthe screw a

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1).Then place the product(2) so that it is firmly fixe

Make sure to use the top center, and not the leftor the right side of the product to adjust the angle.-- 460DXn --Package Contents NotePlease make sur

Cables D-Sub Cable Power Cord OthersRemote Control Batteries (AAA X 2)(Not available in all loca-tions)BNC to RCA Adaptor JackSold separatelyDVI Cabl

-- 460DXn --Your LCD DisplayFrontMENU button [MENU]Opens the on-screen menu and exits from the menu. Also use to exit the OSD menuor return to the pre

Introduction-- 400UXn --Package Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact

AV / S-Video / Component / HDMI Mode• BNCAV / S-Video / HDMI Mode• DVIAV / S-Video / Component Mode• AV / S-VideoPC / BNC / DVI Mode• ComponentPC / DV

POWER S/W ON [ │ ] / OFF [O]Switches the LCD Display On/Off. POWER INThe power cord plugs into the LCD Display andthe wall plug. REMOTE OUT/INYou ca

COMPONENT AUDIO IN [L-AUDIO-R](Component Audio Connection Terminal (Input)) BNC/COMPONENT OUT [R/PR, G/Y, B/PB, H, V] (BNC/Component Connect

LAN (LAN Connection Terminal) USB(USB Connection Terminal)Keyboard / Mouse, Mass Storage Device Com-patible. NoteThe number of LCD Displays that c

ON / OFFMagicInfoMDCLOCKMagicInfo buttons+100 DEL VOL MUTE TTX/MIX MENU ENTER P.MODEAUTO ENTER/PRE-CH CH/P SOURCE INFO EXITUp-Down Left-Right buttons

3. MDC MDC Quick Launch Button.4. LOCK Activates or deactivates all function keys on both the remote con-trol and the LCD Display except for the Power

- This fuction does not work for this LCD Display.16. SOURCEChanges the video source.17. INFOThe current picture information is displayed in the to

29. SIZESwitches the PIP Picture Size.30. REWRewind31. STOPStop32. PLAY / PAUSEPlay/Pause33. FFFast forward-- 460DXn --Mechanical LayoutMechan

Installation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchasing VESA Bracket and Installation

Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right)

OthersRemote Control Batteries (AAA X 2)(Not available in all loca-tions)BNC to RCA Adaptor JackSold separatelyDVI Cable Wall Mount KIT Semi Stand KIT

A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drillholes deep

2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the left and rightpl

A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc

ConnectionsConnecting a ComputerUsing a Power cord with Earth• In the event of failure, the earth lead may cause electric shock. Make sure towire the

Using the BNC (Analog) connector on the video card.• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V portson the back of your LCD Displ

Connecting a VCRAV input devices such as VCRs or Camcorders are connected via the AV IN[VIDEO] or AV IN [S-VIDEO] of the LCD Display using an

Note• Select Component for the connection to a DVD player using the SOURCE button on the front ofthe LCD Display or on the remote control.• Then, sta

Connecting a DTV Set Top BoxConnect a Component cable between the BNC / COMPONENT IN - PR, Y, PBport on the LCD Display and the PR, Y, PB jacks on the

Connecting to a Wired Remote Control Note• You can control your LCD Display by allowing it to receive the remote control signals of otherdevices throu

Note• Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCDDisplay using a DVI to HDMI cable.• Connect the re

Opens the on-screen menu and exits from the menu. Also use to exit the OSD menuor return to the previous menu.Navigate buttons (Up-Down buttons)Moves

NoteYou can connect USB devices such as a mouse or keyboard.Connections

Using the SoftwareInstallation MagicInfo ProInstallation1. Insert CD into the CD-ROM drive.2. Click the MagicInfo Pro installation file.3. When the In

6. Choose a folder to install the MagicInfo Pro program.7. Click "Install."Using the Software

8. The "Installation Status" window appears.9. It is recommended restarting the system for the normal operation of the MagicInfo Pro Serverp

10. When the installation is complete, the MagicInfo Pro executable icon appears on your desktop.11. Double-click the icon to start the program.System

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center for problemsthat

• Do not use benzene, thinner or other flammable substan-ces, or a wet cloth.• We recommend that a SAMSUNG cleansing agent is usedto prevent damage to

A: Check if the signal cable between the computer and the LCD Display is securely connected.(Refer to Connecting a Computer)Problems related to the Sc

A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A: Adjust color using Custom under OSD Co

A: Check if the power is on.A: Check if the power cord is securely connected.A: Check if a special fluorescent or neon lamp is on in the vicinity.Prob

NoteSee PowerSaver described in the manual for further information regarding powersaving functions. For energy conservation, turn your LCD Display OF

Set the resolution at the Control Panel → Display → Screen Saver.Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer

REMOTE OUT/INYou can use a wired remote control by connectingit to your LCD Display. RS232C OUT/IN (RS232C Serial PORT)MDC(Multiple Display Control)

AV AUDIO IN [L-AUDIO-R] (LCD DisplayAudio Connection Terminal (Input)) AV OUT [VIDEO](VIDEO Connection Ter-minal)AV mode (Output) AV IN [VIDEO](VIDEO

-- 400UXn --Remote Control NoteThe performance of the remote control may be affected by a TV or other electronic device operatingnear the LCD Display

STOP PLAY/PAUSE FF1. ON / OFF Turns the LCD Display On/Off.2. MagicInfo MagicInfo Quick Launch Button.3. MDC MDC Quick Launch Button.4. LOCK Activate