Samsung SSA-S2000 Manuale Utente

Standalone RFID Access Controlleruser manualSSA-S2000imagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete s

10_ installation and external connectioninstallation and external connectionINSTALLING THE WALL MOUNT Once the main unit is fi xed with the wall mount,

English _ 11INSTALLATION AND EXTERNAL CONNECTIONCABLE SELECTIONItemCable TypeCable Type1Power (DC12V)DC Power  This ProductBelden #9409, 18 AWG 2 Co

12_ installation and external connectioninstallation and external connectionBYPASS DIODE CONNECTIONIf you connected an inductor (door locks or alarm d

English _ 13INSTALLATION AND EXTERNAL CONNECTIONOutput ConnectionConnect the 10-pin and 7-pin connectors of the controller as follows:- Door open (PO

14_ installation and external connectioninstallation and external connectionEXTERNAL READER CONNECTION- Proximity Reader ConnectionConnect the DC 12V(

English _ 15INITIALIZATIONinitializationBASIC OPERATIONSInitial StatusWhile the product is working normally, the orange LED indicator blinks every one

16_ initializationinitializationWIEGAND OUTPUT SETUPYou can transfer data of the card read by SSA-S2000 in the 26-bit Wiegand output format.Enabling t

English _ 17INITIALIZATIONFORCED INITIALIZATION WITH EXTERNAL LINETurn off the product, shortcircuit between the green line and the orange line with w

18_ reader mode setup- You can specify the operation mode for the device.- Once a mode is specifi ed, it will not switch until you perform the initiali

English _ 19READER MODE SETUPREADER MODE SETUP (RF + P/W) No Master Card or Master PIN is ever registered.If you remember the Master Card or the Maste

2_ safety informationsafety informationCAUTIONRISK OF ELECTRIC SHOCK.DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (O

20_ reader mode setupreader mode setupREADER MODE SETUP (RF/PIN COMBINATION MODE)No Master Card or Master PIN is ever registered.If you remember the M

English _ 21USER MANAGEMENTuser managementTO REGISTER CARDS IN RF ONLY MODEEnsure that you must have registered the Master Card and the device is spec

22_ user managementuser managementTO REGISTER CARDS IN PIN MODEEnsure that you must have registered the Master Card and the device is specifi ed in PIN

English _ 23USER MANAGEMENTTO DELETE A REGISTERED CARD OR PIN NUMBEREnsure that you must have registered the Master Card or the Master PIN number and

24_ basic setupbasic setupDURESS ALARMIf you are forced to open the door under the control of a criminal such as a robber, enter the predefi ned passwo

English _ 25BASIC SETUPX Y Z[ \ ]^ _ `lzj lu{WizzhTzYWWWtGjX Y Z[ \ ]^ _ `lzj lu{WizzhTzYWWWTO SPECIFY THE KEYPAD INPUT SUSPENSION TIME

26_ basic setupbasic setupTO SPECIFY THE OPERATION TIME OF THE DOOR CONTACT SENSORThe Door Contact sensor detects the opening of the door.If the door

English _ 27BASIC SETUPTO SPECIFY THE ALARM OUTPUT PORT FOR THE DISMANTLED DEVICESpecify the alarm type for the dismantled device. The alarm rings fro

28_ basic setupbasic setupTO SET OR RELEASE THE QUICK MODEThe QUICK mode is applicable to RF ONLY mode (01) and PIN ONLY mode (03) and RF/PIN combinat

English _ 29I/O TIME SETUPOutput Port Setting TableYou must specify the port settings using whatever combination of the followings if you want the dev

English _ 3SAFETY INFORMATIONApparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be place

30_ I/O time setupI/O time setupTO SPECIFY THE OUTPUT TIME IF THE CARD IS NOT AUTHENTICATEDYou can specify the output time if an unregistered card or

English _ 31I/O TIME SETUPTO SPECIFY THE ALARM OUTPUT FOR AN INPUT ERROR OF THE DOOR CONTACT SENSORYou can specify the output port and operation time

32_ I/O time setupI/O time setupTO SPECIFY THE ALARM OPERATION TIME FOR AUX 2Present the Master Card to the device.Press Button 2and Button 6in sequen

English _ 33I/O TIME SETUPTO ACTIVATE OR DEACTIVATE THE DOOR RELAY BY THE DOOR CONTACT SENSORYou can set the Door Contact Sensor to control the door l

34_ advanced settingadvanced settingTO SPECIFY THE TTL OUTPUT OPERATION MODEThis is to switch the TTL output from LOW (0V) to HIGH (5V) when it is act

English _ 35ADVANCED SETTINGTO SPECIFY THE CHIME BELL OPERATION TIMEYou can specify the chime bell operation time.Present the Master Card to the devic

36_ advanced settingadvanced settingTO SPECIFY THE INPUT MODE FOR AUX 2You can specify an operation for the auxiliary port 2 when it switches from LOW

English _ 37ADVANCED SETTINGTO SPECIFY THE INPUT MODE FOR THE EXIT BUTTONYou can specify an operation for the Exit button when it switches from LOW (0

38_ additional featuresMUTEYou can mute the keypad tone or melody in normal operation.Present the Master Card to the device.Press Button 5and Button 1

English _ 39ADDITIONAL FEATURESTO CHECK THE OUTPUT SPECIFIED FOR A REGISTERED CARD USERYou can check the output setting that you specifi ed in “To spec

4_ contentscontentsPRODUCT INTRODUCTION66 Features7 What’s included8 At a Glance9 Cable Color SchemeINSTALLATION AND EXTERNAL CONNECTION1010 Instal

40_ additional featuresadditional featuresTO CHECK THE OUTPUT SPECIFIED FOR THE DOOR CONTACT SENSOR ALARM You can check the output setting that you sp

English _ 41ADDITIONAL FEATURESTO CHECK THE OUTPUT SPECIFIED FOR AUX 2You can check the output setting that you specifi ed in “To specify the alarm ope

42_ additional featuresother informationINITIAL VALUESThis product operates in the following initial values: For changing the settings or registering/

English _ 43ADDITIONAL FEATURESFUNCTION CODESNO.Code Number Function Item111Additional user card registration (RF CARD ONLY MODE)Additional user card

44_ other informationother informationNO.Code Number Function Item2951Turn off the soundTurn off the sound3052Turn on the soundTurn on the sound3160To

English _ 45TROUBLESHOOTINGtroubleshootingTROUBLESHOOTINGIf the product does not function properly, please see the below for trouble shooting.PROBLEM

46_ troubleshootingtroubleshootingPROBLEM ACTIONI can not register an additional user card (or PIN).1) Check if the product is installed properly and

English _ 47TROUBLESHOOTINGPROBLEM ACTIONThe user card (or PIN) is not deleted.Check the operation status of the product1) Check if the product works

48_ troubleshootingtroubleshootingPROBLEM ACTIONSSA-S2000 can recognize a presented RF card but can not recognize the RF card number using the keypad.

English _ 49TROUBLESHOOTINGPROBLEM ACTIONThe external reader can the RF card but the RF card data will not be transferred to SSA-S2000 or irrelevant d

English _ 5CONTENTSADVANCED SETTING3434 To specify the TTL output operation mode34 To set the chime bell function35 To specify the chime bell opera

50_ product specifi cationsproduct specifi cationsPRODUCT SPECIFICATIONSItem SSA-S2000User 512 Users Power / Current DC 12V / Max.110mA Reader Port Exte

AB82-02555ACorrect disposal of batteries in this product(Applicable in the European Union and other European countries with separate battery return sy

6_ product introductionFEATURESThis controller is best designed for a single entry door control (single door access control).It can store up to 512 ca

English _ 7PRODUCT INTRODUCTIONWHAT’S INCLUDEDCheck if the following items are included in the product package.X Y Z[ \ ]^ _ `lzj lu{WizzhTzYWWWMai

8_ product introductionproduct introductionAT A GLANCEFront View System Status LEDIndicates the operation status of the system.KeypadUse this to confi

English _ 9PRODUCT INTRODUCTIONCABLE COLOR SCHEME2-PIN ConnectorI/O Pins Signal Cable ColorPower (+12V) DC +12V RedEarth-grounding GND(-) Black10-PIN