Samsung ML-2250 Manuale Utente Scaricare il pdf (Pagina 6)

11. With a small common screwdriver, press the entire plate

towards the edge of the developer roller cavity, and lift up.

The plate should come loose.

12. Gently pry out the roller plate from the cartridge.

The foam seal, and possibly a plastic flat washer will come out

with it. Be careful not to damage the foam seal, or lose the

flat washer.

13. Remove the developer roller.

Be careful not to damage or lose the flat washers on the roller.

14. It is highly recommended that the doctor blade be cleaned.

Failure to do so will cause streaking. The doctor blade can be

cleaned WITHOUT removing it. Dampen a cotton swab with

alcohol, and clean the blade. Be careful not to press too hard

and damage the blade. If the blade has a heavy build-up of

toner on it, clean it with acetone, and then alcohol.

Removing the blade is difficult because of the foam seals

attached. If the seals are torn, the cartridge will leak. That is

why we do not recommend it. Once replacement doctor blades

are available, they will have to come with replacement foam.

SAMSUNG ML-2250 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

1 2 3 4 5 6 7 8 9 10 11

Commenti su questo manuale

Nessun commento

Samsung ML-2250 Manuale Utente Pagina 6

Commenti su questo manuale

Prodotti e manuali riguardandi Software Samsung ML-2250