Samsung RSE8KPAS Specifiche Scaricare il pdf (Pagina 19)

Operating Instructions & Installation

3) Water Supply function

3-1) When the ice tray is levelled again after ejecting ice, the water solenoid valve will be controlled to supply water.

4) Ice production

4-1) After eject waiting time from the water supply, the control board will check the temperature.

4-2) If the sensor reads the temperature lower than -17 for more than 5 minutes, than the ice production process is

completed.

5) Test function

● In order to operate a test function, press the knob (Test Switch) for 1.5 second.

● This function can be used to check a proper working, to clean the ice tray, and to adjust the water level in the ice tray.

5-1) This function only works when the ice tray is leveled and the ice full signal is cleared.

5-2) When the water line is connected, each process such as a water supply, ejection, and leveling, can be investigated

by this button.

6) Water Dispenser Function

6-1) This function is directly connected to tap water. When the Water Lever is pressed, the water solenoid valve will be

open and water will come out. If the water extracting function is faulty, check out the solenoid, the connection pipe

and the status of water supply and repair it

7) Ice off function

7-1) When the ice select button is pressed for more than 3 seconds, ICE OFF will be selected and when it is pressed for

more than 3 seconds again, ICE OFF will be cancelled.

7-2) Ice production is on with the power on. So, WATER is automatically selected and it lights up.

7-3) When ICE OFF is selected, the ice maker does not operate.

7-4) As ICE OFF is selected, the ICE OFF LED goes on immediately. And, during ice ejection, water supply or

restoration of the horizontal state, it will stop producing ice after the completion of the final water supply.

8) Functions when the freezer door is open

● When the freeze door is open, all ice maker related processes will cease in order to minimize noise and to prevent ice

from dispensing.

8-1) The ice tray stops moving.

8-2) The water supply process remains working as usual.

8-3) If the Ice-Tray is tilted over slightly or deviated from its horizontal position when checking the door inside, it

indicates that the F-Door got opened during the ice ejection. If the tray does not return to its horizontal position

more than 30 seconds after the door is closed, it can be considered to be faulty. If the F-Room stops working due

to its door open, its Test function doesn ’t work because it is under actual operation.

8-4)

When it goes into the Test function with the Test button pressed, it carries out Ice Ejection regardless of the F-Door Open.

9) Ice Eject Function

● After the completion of the ice making, the operation of ice separation from the ice tray will be carried out as follows.

According to the state of the Ice Eject S/W, it is classified as Full Ice Bin and Not Full Ice Bin.

Ice Bin Full : 1

Step → 2

Step → 3

Step → 4

Step → 5

Step → 6

Step

Ice Bin Not Full : 1

Step → 2

Step → 6

Step

- The ice eject standby time is as follows.(With ice full,it stands by for an hour)

No.of

Water Supply

Once

2~4 times

Detection of Water Supply

Low Temp (lower than 17 )

65min(58+7)

58min

High Temp (over 18)

58min

Low Temp (lower than 17)

110min

70min

High Temp (over 18)

95min

70min

Detection of No Water Supply

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

Commenti su questo manuale

Nessun commento

Samsung RSE8KPAS Specifiche Pagina 19

Commenti su questo manuale

Prodotti e manuali riguardandi no Samsung RSE8KPAS